返回首页

河北巨弘建筑工程有限公司

本站导航

新闻动态

当前位置:网站首页 > 新闻动态 > 详细信息
玻璃钢化粪池是一种利用沉淀和厌氧发酵原理
添加时间:2021/11/12 15:38:33     浏览次数:
玻璃钢化粪池是一种利用沉淀和厌氧发酵原理去除生活污水中悬浮物性有机物的最初级处理构筑物生活污水中含有大量的粪便、纸屑、病原虫等杂志。
Glass reinforced septic tank is a kind of primary treatment structure which uses the principle of sedimentation and anaerobic fermentation to remove suspended organic matter in domestic sewage, which contains a large number of feces, paper chips, pathogens and other magazines.
热性能良好
Good thermal performance
FRP热导率低,室温下为1.25~1.67kJ/(m·h·K),只有金属的1/100~1/1000,是优良的绝热材料。在瞬时超高温情况下,是理想的热防护和耐烧蚀材料,能保护宇宙飞行器在2000℃以上承受高速气流的冲刷。
FRP has low thermal conductivity, and it is 1.25-1.67kj/ (m · h · K) at room temperature, and only 1 / 100-1 / 1000 of metal is a good insulation material. It is an ideal material for thermal protection and ablation under the condition of instantaneous super high temperature, which can protect spacecraft from high-speed airflow scour at above 2000 ℃.
可设计性好
Good design
(1)可以根据需要,灵活地设计出各种结构产品,来满足使用要求,可以使产品有很好的整体性。
(1) According to the needs, various structural products can be designed flexibly to meet the requirements of use, which can make the product have a good integrity.
(2)可以充分选择材料来满足产品的性能,如:可以设计出耐腐的,耐瞬时高温的、产品某方向上有特别高强度的、介电性好的,等等。
(2) We can choose materials to meet the performance of the products, such as: it can design corrosion resistant, instantaneous high temperature resistant, products in a direction of special high strength, good dielectric, and so on.
上一页  抽真空成型的抽气孔设计是模具设计的关键  
下一页  护坡塑料模鉴定方法
  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 检查井模具
  • 化粪池模具
  • 隔离墩模具
  • 电缆槽模具
  • 整体化粪池
  • 异型预定件

Copyright © 技术支持:遨游网络

  • 联系我们
  • 网上订单
  • 工程案例
  • 本站导航

搜索

  • 关于我们
  • 新闻动态
  • 案例展示
  • 网上订单
  • 联系我们
  • 检查井模具
  • 化粪池模具
  • 隔离墩模具
  • 电缆槽模具
  • 整体化粪池
  • 异型预定件